UGPCB-LOGO
F4B-1/2 Teflon PCB Glass Fabric Copper-Clad Laminates
F4B-1/2 Teflon PCB glass fabric copper-clad laminates are designed to meet the stringent electrical performance requirements of microwave circuits. These laminates stand out due to their excellent electrical properties and enhanced mechanical strength, making them ideal for microwave PCB applications.
Technical Specifications
Appearance
The appearance of these laminates meets the specification requirements set by National and Military Standards for microwave PCB laminates.
Types
- F4B255
- F4B265
Dielectric Constant
- 2.55
- 2.65
Available Dimensions (mm)
- 300×250, 380×350, 440×550, 500×500, 460×610, 600×500
- 840×840, 1200×1000, 1500×1000
- Custom dimensions are available upon request.
Kupferdicke
- 0.035μm, 0.018μm
Thickness and Tolerance (mm)
| Laminate Thickness | Tolerance |
|---|---|
| 0.17, 0.25 | ±0.025 |
| 0.5, 0.8, 1.0 | ±0.05 |
| 1.5, 2.0 | ±0.05 |
| 3.0, 4.0, 5.0 | ±0.09 |
The laminate thickness includes the copper thickness. Custom dimensions are available upon request.
Mechanical Strength
| Thickness (mm) | Maximum Warp | Single Side | Double Side |
|---|---|---|---|
| 0.25～0.5 | 0.030 | 0.050 | 0.025 |
| 0.8～1.0 | 0.025 | 0.030 | 0.020 |
| 1.5～2.0 | 0.020 | 0.025 | 0.015 |
| 3.0～5.0 | 0.015 | 0.020 | 0.010 |
Cutting/Punching Strength:
- Thickness ≤1mm: No burrs after cutting, minimum space between punching holes is 0.55mm, no delamination.
- Thickness >1mm: No burrs after cutting, minimum space between punching holes is 1.10mm, no delamination.
Peel Strength (1oz copper)
- Normal State: ≥15N/cm; No bubbles or delamination.
- After Exposure to Constant Humidity and Temperature: Peel strength ≥12N/cm (after keeping in melting solder at 260°C ±2°C for 20 Sekunden).
Chemical Properties
These laminates can be chemically etched using standard PCB methods without changing their dielectric properties. Plating through holes is possible but requires sodium treatment or plasma treatment.
Electrical Properties
| Name | Test Condition | Unit | Value |
|---|---|---|---|
| Density | Normal state | g/cm³ | 2.2～2.3 |
| Moisture Absorption | Dip in distilled water 20±2°C for 24 hours | % | ≤0.1 |
| Operating Temperature | High-low temperature chamber | °C | -50～+260 |
| Wärmeleitfähigkeit | W/m/k | 0.3 | |
| CTE (typical) | 0～100°C | ppm/°C | x:16, y:21 z:186 |
| Shrinkage Factor | 2 hours in boiling water | % | ≤0.0002 |
| Surface Resistivity | 500V DC, Normal state | M·Ω | ≥1*10⁴ |
| Constant humidity and temperature | ≥5*10³ | ||
| Volume Resistivity | Normal state | MΩ.cm | ≥1*10⁶ |
| Constant humidity and temperature | ≥9*10⁴ | ||
| Pin Resistance | 500VDC, Normal state | MΩ | ≥5*10⁴ |
| Constant humidity and temperature | ≥5*102 | ||
| Surface Dielectric Strength | Normal state, d=1mm (Kv/mm) | ≥1.2 | |
| Constant humidity and temperature | ≥1.1 | ||
| Dielectric Constant | 10GHZ, | εr | 2.55/2.65 (±2%) |
| Dissipation Factor | 10GHZ, | tgδ | ≤1*10⁻³ |
