et,PCB, Personnalisation PCBA et PECVD, producteur de prototypage et de fabrication

Télécharger | À propos | Contact | Plan du site

GPS Tracker Circuit PCBA Board

Nom: GPS Tracker Circuit PCBA Board

The number of layers that can be copied: 1-32 couches

Largeur de ligne minimale et espacement des lignes: 3mil

Ouverture laser minimale: 4mil

Ouverture mécanique minimale: 8mil

Épaisseur de la feuille de cuivre: 18-175cm (standard: 18cm35cm70cm)

Résistance au pelage: 1.25N/mm

Diamètre minimum du trou de perforation: un seul côté: 0.9mm/35 mil

Diamètre minimum du trou: 0.25mm/10 mil

Tolérance d'ouverture: ≤φ0,8 mm ± 0,05 mm

Hole tolerance: ±0.05mm

  • Détails du produit

Overview of GPS

What is GPS?

The Global Positioning System (GPS) is a high-precision radio navigation positioning system based on artificial earth satellites. It can provide accurate geographic location, vehicle speed, and precise time information.

Benefits of GPS

Since its inception, GPS has attracted many users with its high precision, all-weather, global coverage, convenience, and flexibility. GPS is not only the patron saint of automobiles but also the wisdom of logistics industry management.

GPS in the Logistics Industry

Importance in Logistics

With the rapid development of the logistics industry, GPS has played a pivotal role and has become the second largest consumer group after the automobile market.

GPS PCB Antennas

Types of GPS PCB Antennas

GPS PCB antennas come in two forms: active and passive.

Active Antennas

Active antennas have a low noise amplifier (LNA) built into the module. They are on their own board and are connected to your printed circuit board via coaxial cables.

Passive Antennas

Passive antennas do not include an amplifier.

Suivant:

Laisser une réponse

Laisser un message