Progettazione PCB, Produzione PCB, PCB, PECVD, e selezione dei componenti con servizio unico

Scaricamento | Di | Contatto | Mappa del sito

4 Progettazione PCB/PCBA del controller di livello - UGPCB

Progettazione PCB multistrato/

4 Progettazione PCB/PCBA del controller di livello

Nome: 4 Progettazione PCB/PCBA del controller di livello

Foglio: IT180, F4BM, FR4, FR1-4, ecc.

Strati designabili: 1-32 strati

Larghezza minima della linea e spaziatura della linea: 3mil

Apertura laser minima: 4mil

Apertura meccanica minima: 8mil

Spessore di lamina di rame: 18-175cm (standard: 18CM35CM70CM)

Forza di buccia: 1.25N/mm

Diametro del foro di punzonatura minimo: lato singolo: 0.9mm/35mil

Diametro del foro minimo: 0.25mm/10mil

Tolleranza di apertura: ≤φ0,8 mm ± 0,05 mm

  • Dettagli del prodotto

Overview of 4-Layer PCBs

A 4-layer PCB means that there are 4 layers to route electrical signals: top layer, inner layer 1, inner layer 2, and bottom layer.

Outer Layers: Superiore e inferiore

The top and bottom layers are the outer layers where components and wiring are placed.

Inner Layers: Inner 1 and Inner 2

Inner 1 and Inner 2 are located in the core and are typically used as power planes or for signal routing.

Configurations of 4-Layer PCBs

There are two common configurations for 4-layer PCBs:

Configuration 1: 3 Signal Layers + GND Layer

In this configuration, three of the layers are used for signal routing, and one layer is used as a ground (GND) plane.

Configuration 2: 2 Signal Layers + VCC Layer + GND Layer

In this configuration, two of the layers are used for signal routing, one layer is used as a power (VCC) plane, and one layer is used as a ground (GND) plane.

Prec:

Prossimo:

Lascia una risposta

Lasciate un messaggio