E,PCB, Personalizzazione PCBA e PECVD, produttore di prototipazione e produzione

Scaricamento | Di | Contatto | Mappa del sito

Humidifier Multilayer PCB/PCBA Design - E

Progettazione PCB multistrato/

Humidifier Multilayer PCB/PCBA Design

Nome: Humidifier Multilayer PCB/PCBA Design

Sheet: IT180, F4BM, FR4, FR1-4, ecc.

Designable layers: 1-32 strati

Minimum line width and line spacing: 3mil

Minimum laser aperture: 4mil

Minimum mechanical aperture: 8mil

Copper foil thickness: 18-175цm (standard: 18цm35цm70цm)

Peel strength: 1.25N/mm

Minimum punching hole diameter: single side: 0.9mm/35mil

Minimum hole diameter: 0.25mm/10mil

Aperture tolerance: ≤φ0.8mm±0.05mm

  • Dettagli del prodotto

Key Spray Characteristics

Ultra-fine Spray Particles

  • Ultra-fine spray particles, large atomization amount, do not wet the desktop.

Low Power Consumption

  • Low driving voltage, low power consumption, low impedance, stable waveform and high conversion efficiency.

Environmentally Friendly Design

Circuit Board Composition

  • The circuit board adopts electronic components, which is environmentally friendly.

Advanced Atomizing Tablet

Ultra-fine Spray Aperture

  • The middle part of the atomizing tablet has a 5um ultra-fine spray aperture and 740 ultra-dense spray holes.

Safety Features

Built-in Protection Program

  • Built-in protection program, automatically power off after three hours, and it can be restored by replugging the power supply.

Prec:

Lascia una risposta

Lasciate un messaggio