そして,プリント基板, PCBA および PECVD のカスタマイズ, 試作・製造プロデューサー

ダウンロード | について | 接触 | サイトマップ

GPS Tracker Circuit PCBA Board - そして

PCBリバースエンジニアリング/

GPS Tracker Circuit PCBA Board

名前: GPS Tracker Circuit PCBA Board

The number of layers that can be copied: 1-32 レイヤー

Minimum line width and line spacing: 3ミル

Minimum laser aperture: 4ミル

Minimum mechanical aperture: 8ミル

Copper foil thickness: 18-175цm (標準: 18цm35цm70цm)

Peel strength: 1.25N/mm

Minimum punching hole diameter: single side: 0.9mm/35mil

Minimum hole diameter: 0.25mm/10mil

Aperture tolerance: ≤φ0.8mm±0.05mm

Hole tolerance: ±0.05mm

  • 製品詳細

Overview of GPS

What is GPS?

The Global Positioning System (GPS) is a high-precision radio navigation positioning system based on artificial earth satellites. It can provide accurate geographic location, vehicle speed, and precise time information.

Benefits of GPS

Since its inception, GPS has attracted many users with its high precision, all-weather, global coverage, convenience, と柔軟性. GPS is not only the patron saint of automobiles but also the wisdom of logistics industry management.

GPS in the Logistics Industry

Importance in Logistics

With the rapid development of the logistics industry, GPS has played a pivotal role and has become the second largest consumer group after the automobile market.

GPS PCB Antennas

Types of GPS PCB Antennas

GPS PCB antennas come in two forms: active and passive.

Active Antennas

Active antennas have a low noise amplifier (LNA) built into the module. They are on their own board and are connected to your printed circuit board via coaxial cables.

Passive Antennas

Passive antennas do not include an amplifier.

次:

返信を残す

伝言を残す