Main Chipset

Digital image acquisition and processing system chip
A piece of DSP TMS320C13B chip
NVRAM 2M bytes
Two FPGA Lattice LFXP6C chips
DSP chip 2MB FLASH, 8MB SDRAM

Technical Parameters

32 I/O inputs and 64 I/O outputs
2-way optical isolation RS232
1 RS422 interface and 1 RS485 interface
48-way 16-bit synchronous 200KSPS A/D conversion
One photoelectric isolation CAN interface and one GPS timing
Built-in real-time clock, power monitoring, and watchdog, 등.
Support -40～85℃ industrial wide temperature application

Introduction to PCBA of Digital Image Acquisition and Processing System

개요

The digital image acquisition and processing system PCBA can realize high-speed image acquisition and storage of the camera, compress and serially communicate with the PC to realize the transmission of image data, realize image processing and display on the PC, 등.

PCBA Design Mode

The PCBA design mode of the digital image acquisition and processing system adopts the hardware acquisition-software processing mode. After the image is sampled and quantized, it is converted into a digital image and input and stored in the frame memory. The image is analyzed by a computer to achieve the desired result.

Application Fields

Digital image acquisition and processing system PCBA can be used in various fields such as video conferencing, security monitoring, traffic charges, industrial inspection, image acquisition, and other image acquisition, 처리, and analysis fields.