Rogers PCB RT/duroid 6006 and 6010.2LM substrates

PCB material is mainly used in electronic and microwave circuits. Its performance has an important impact on the signal transmission speed, energy loss and characteristic impedance of the circuit system. RT/듀로이드 6006 and 6010.2LM is a high performance microwave PCB material introduced by Rogers Corporation, a well-known material supplier. Its material type is ceramic-polytetrafluoroethylene (PTFE) composite with dielectric constant of 6.15, which is mainly for high-frequency circuit applications.

RT/듀로이드 6006 has strictly controlled dielectric constant, 두께, low hygroscopicity and excellent thermomechanical stability. It has a simple manufacturing process and can maintain high stability in long-term use. Users can specify the thickness of PCB material and the weight of copper foil when ordering RT/duroid 6006. Rogers provides two-sided thickness from 1/2 온스. 에게 2 온스. /ft2 (18 에게 70) for RT/duroid 6006 microwave PCB materials μ M) Standard or reverse-treated electroplated copper clad, with thick aluminium, brass or copper based metal sheets available for customization. RT/듀로이드 6006 contains the following standard tolerance media thickness: 0.010, 0.025, 0.050, 0.075″and 0.100″ (0.254, 0.635, 1.270, 1.905, 2.54 mm).

RT/듀로이드 6006 microwave PCB material can be used in the following fields: patch antenna, satellite communication system, 전력 증폭기, aircraft anti-collision system, ground-based radar early warning system.

Features and advantages of RT/duroid 6006:

A dielectric constant of up to 6.15 helps reduce circuit size

Ideal for low loss, X band and below

Strictly controlled thickness and dielectric constant tolerances for circuits requiring high repeatability

Product specifications for RT/duroid 6006:

Standard thickness, 0.005 (0.127 mm), 0.010 (0.254 mm), 0.025 (0.635 mm), 0.050 (1.27 mm), 0.075 (1.90 mm), 0.100 (2.50 mm)

Standard panel dimensions for RT/duroid 6006:

10″X 10″ (254 엑스 254 mm), 10 “X 20” (254 엑스 508 mm), 20 “X 20” (508 엑스 508 mm) – Nonstandard, 18 “X 12” (457 엑스 305 mm), 18 “X 24” (457 엑스 610 mm) – Nonstandard

Standard copper clad thickness for RT/duroid 6006

1/2 온스. (18) mm), 1 온스. (35) mm), 2 온스. (70) mm)

Model of RT/duroid 6006 and 6010.2LM:

RT/듀로이드 6006 PTFE Ceramic, RT/듀로이드 6000, 6006 10X20 2E/2E 0100+-001/DI, 6010.2LM 10X10 HH/HH 0250+-001/DI, 6010.2LM 20X20 HH/HH 0250+-001/DI, 6010.2LM 20X20 1E/063AL 0250+-001/DI, 6010.2LM 20X20 H1/063AL 0100+-001/DI, 6010.2LM 10X10 2E/150AL 0250+-001/DI, 6010.2LM 10X10 H2/H2 02/00+- DI, 6010.2LM 10X10 5E/5E 0100+-001/DI, 6010.2LM 10X20 H1/200AL 0250+-001/DI, 6010.2LM 10X10 H1/H1 0100+-001/DI, RT/duroid 6010.2LMPTFE ceramic, 6010.2LM 10X10 HH/HH 0400+-0015/DI, 6010.2LM 20X20 HH/200ALTT 0250+-001/DI, RT/duroid 6010.2LMNSPTFE+Ceramic, 6010.2LMNS 20X20 HH/HH 0050+-0005/DI

Category of RT / 듀로이드 6006

microwave circuit board and high frequency laminate

Application of RT / 듀로이드 6006:

기관차, 철도 운송, 전력, 재생 가능 에너지, 본체와 섀시, 조명, 장비 및 인버터 전원 공급 장치, 국방 산업 장비, 온보드, 온보드 통신, 기내 엔터테인먼트, Internet of vehicles, 산업 자동화, 산업용 서보, 실내 조명, 스마트 홈, 산업 설비 제어, 휴대폰 관련, 전기 자동차 전력 시스템, 통신 장비, Internet of things, 저장, safety system, patch antenna, satellite communication system, 전력 증폭기, aircraft anti-collision system, Ground radar early warning system,

The two dielectric constants of RT/duroid 6006 are manufacturing process (6.15) and design (6.45). Design dielectric constant 6.45 is chosen for circuit simulation.

If the dielectric constant of the bonded sheet is required, it is recommended to use RO3006 bonded sheet with a minimum thickness of 5 밀 (0.127 mm). If there is no requirement for the dielectric constant of the bonded sheet, it has a thickness of 1.5mil (0.038mm), ~와 같은 2929.

Rogers RT/duroid high-frequency circuit materials are composite PCB materials of PTFE (including randomly filled glass or ceramic) suitable for high-reliability applications such as aerospace. The RT/duroid family has long been the industry’s most reliable high-reliability PCB material.

The advantages of RT/Duroid PCB material, with ultra-low loss, 낮은 수분 흡수, stable dielectric constant (DK) with frequency, low outgassing, suitable for aerospace applications, antenna systems and communication systems.

RT Duroid PCB materials products include

RT/듀로이드 5870, DK 2.33, Df: .0012@10GHz

RT/듀로이드 5880, DK 2.20, Df: .0009@10GHz

RT/듀로이드 5880LZ, DK 2.0, with unique filler to reduce material weight

RT/듀로이드 6002, DK 2.94, with excellent electrical and mechanical properties for complex microwave structures

RT/듀로이드 6006 and 6010.2LM, DK 6.15 또는 10.2, tight thickness control ensures size reduction

RT/듀로이드 6035HTC, DK 3.6, thermal conductivity of 1.44 W/m/K, 2.4 times that of standard RT/duroid products

RT/듀로이드 6202, DK 2.90, reinforced with glass cloth for excellent dimensional stability

RT/duroid® 6202PR, low Dk of 2.90 또는 2.98, reliable mechanical properties and excellent electrical properties for planar resistor applications

The antenna gain is related to the dielectric loss and copper foil loss of the RT/duroid 6010 PCB 재료. An increase in both losses will reduce the gain index of the entire antenna. Due to the high frequency, copper foil loss plays a dominant role. 예를 들어, there are scratches and stains on the copper foil surface and the dielectric surface, so the scratches on the antenna transmission microstrip line and the dielectric stain at the port will increase the loss and reduce the gain. These are mainly related to the PCB processing process.

RT/듀로이드 6010 PCB material is polytetrafluoroethylene with a small amount of ceramic powder added, and the texture is relatively soft. If the surface dielectric and copper foil are damaged, it is equivalent to increasing the loss of the dielectric and copper foil, which will reduce the antenna gain. In order to improve the antenna yield, the PCB processing process must prohibit any mechanical grinding or friction on the PTFE dielectric surface after copper foil etching to protect the roughness of the dielectric surface after etching. After processing, chemical cleaning is required to ensure that the surface is free of stains. Confirm PCB processing During the process, attention should be paid to protecting the surface roughness of the copper foil and the surface of the dielectric to improve the antenna yield.

로저스’ 6010 series of high-frequency PCB materials used to have three models, 6010.2LM, 6010.5LM and 6010.8LM, but the latter two have been discontinued one after another, and 6010.2LM is now recommended.