Automotive lighting LED PCB assembly

Advantages of Automotive LED Lights:

1. Good monochrome, rich and bright colors. The color saturation reaches 130% full color, making the light clearer and softer.
2. Short response time, only 60 nanoseconds, especially suitable for automotive headlight sources, winning precious time for drivers to reduce accidents.
3. Small size and light weight. Utilizing its characteristics, various styles of thin and compact lamps can be designed, providing space for automotive styling design.
4. Low luminous flux of a single LED. The current research level of a single LED’s luminous flux can reach 120lm/W, and the product level is less than or equal to 60lm/W. High-power LEDs often require larger heat sinks, so LED light sources generally adopt an LED array design method.
5. The luminous efficiency of LED decreases with temperature increase. Generally, the chip will fail when the temperature exceeds 120℃. Thermal design must be considered in the process design of lamp assembly manufacturing.
6. Long lifespan, good shock resistance. LED is a semiconductor component. Unlike incandescent lamps, LED does not have fragile moving parts like glass and tungsten filaments. The failure rate is extremely low, maintenance-free.
7. High efficiency, low energy consumption. LED light sources do not need color filters and can directly produce the red, amber, and other colors required by automotive lamps without loss, with an electricity utilization rate of up to 80%.
8. Green lighting source. LED spectrum has good monochrome properties, no extra infrared, ultraviolet, and other spectra, contains no mercury harmful substances, low heat and radiation.
9. Planar luminescence, strong directionality. It is different from the point source incandescent lamp, with a viewing angle of less than or equal to 180°. When designing, it is necessary to pay attention to and use LED light sources with different viewing angles, not greater than 180°.
10. LED is a multicomponent compound semiconductor component. The characteristics of multicomponent compound semiconductor components are that their electrical, optical, thermal, and mechanical parameters are very discrete. In the design, this characteristic should be fully considered, requiring component manufacturers to strictly classify and grade components according to the requirements of automotive LED light sources.
11. Energy-saving and environmental protection: The energy consumption of LED lights is 1/20 of halogen lamps.
12. Low cost, long lifespan: The lifespan of LED lights from well-known manufacturers can reach 100,000 hours.

When it is on, it represents that your car basically cannot drive, and it is still on.

13. High brightness: The brightness is far higher than that of halogen lamps, serving as a brake light warning lamp without any pressure.
14. Low voltage safety: As the earliest electronic component applied in electronic products, LED only needs a 12V DC voltage to light up, without worrying about the voltage above 20,000 xenon lamps.
15. Instantaneous lighting: None

If you need a xenon lamp again, it will light up again and can be used at any time.

16. Single LED small volume: This is a favorite of designers, who can assemble it into various shapes you like.

UGPCBprovides automotive lighting LED PCB assembly services. This is a PCBA one-stop assembly factory with senior industry experience. Inquiries are welcome.