ЛОГОТИП УГКПБ
Введение
UGPCB DS-7409 HG (КК) Материал подложки корпуса IC имеет низкий Df., Галоген & без фосфора. Приложения включают Flip Chip BoC & РЧ-модуль.
Glass Epoxy Laminates in Industrial Equipment
Glass Epoxy Laminates, which are widely used in industrial equipment, have been further refined and are helping to promote sustainable economic growth in an environmentally-friendly way in accordance with ongoing changes in our lifestyle. They are the basis on which numerous environmentally-friendly products, including mobile applications, computer systems, and car electronics, have been developed and produced.
DS-7409 Variants
DS-7409
DS-7409S (Н)
Material Properties of DS-7409
Tg (Glass Transition Temperature)
Property: Tg
Unit: градус Цельсия
Test Condition: ДСК
Typical Value: 170
Test Method: IPC-TM-650.2.4.25c
TMA (Thermomechanical Analysis)
Property: TMA
Unit: градус Цельсия
Test Condition: Н/Д
Typical Value: 165
Test Method: IPC-TM-650.2.4.24c
CTE Z-axis (Coefficient of Thermal Expansion)
Property: CTE Z-axis
Unit: ppm/degree Celsius
Test Condition: Ambient to Tg
Typical Value: 41
Test Method: IPC-TM-650.2.4.41
Z-axis Expansion
Property: Z-axis Expansion
Unit: %
Test Condition: 50 degree Celsius to 260 градус Цельсия
Typical Value: 3.3
Test Method: IPC-TM-650.2.4.41
Decomposition Temperature (5% wt loss)
Property: Decomposition Temperature
Unit: градус Цельсия
Test Condition: TGA
Typical Value: 295
Test Method: IPC-TM-650.2.4.40
T-260 & T-288 (Thermomechanical Analysis)
Property: T-260
Unit: мин
Test Condition: TMA
Typical Value: 7
Test Method: IPC-TM-650.2.4.24.1
Property: T-288
Unit: мин
Test Condition: TMA
Typical Value: –
Test Method: IPC-TM-650.2.4.24.1
Диэлектрическая проницаемость & Dissipation Factor
Property: Диэлектрическая проницаемость (Resin content 50%)
Unit: C-24/23/50(1ГГц)
Test Condition: Н/Д
Typical Value: 4.2
Test Method: IPC-TM-650.2.5.5.9
Property: Dissipation Factor (Resin content 50%)
Unit: C-24/23/50(1ГГц)
Test Condition: Н/Д
Typical Value: 0.015
Test Method: IPC-TM-650.2.5.5.9
Peel Strength
Property: Peel Strength (Standard profile 1oz)
Unit: N/mm
Test Condition: Condition A
Typical Value: 2.0
Test Method: IPC-TM-650.2.4.8
Water Absorption
Property: Water Absorption
Unit: %
Test Condition: E-24/50+D-24/23
Typical Value: 0.12
Test Method: IPC-TM-650.2.6.2.1
