и,печатная плата, Настройка PCBA и PECVD, производитель прототипов и производства

Скачать | О | Контакт | Карта сайта

Ф4БМ-2 & Обзор материалов радиочастотных печатных плат F4BM - и

Список материалов печатной платы

Ф4БМ-2 & Обзор материалов радиочастотных печатных плат F4BM

Material Composition and Manufacturing Process

Ф4БМ-2 & F4BM Radio frequency PCB material is laminated by laying up of woven glass fabric, bond film, with Teflon PCB resin and Polytrtrafluoroethylene(ПТФЭ) фильм, according to the scientific formulation and strict technology process. F4BM-2 takes some advantages over F4B series in the electrical performance (wider range of dielectric constant, lower dielectric loss angle tangent, increased resistance and more stability of performance).

Dielectric Constant Specifications

Ф4БМ-2 & F4BM Dielectric Constant: f4bm220(dk 2.20), f4bm255(dk 2.55), f4bm265(dk 2.65), f4bm300(dk 3.0). Support customized dielectric constant.

Standard Dimensions

F4BM-2 Dimension(мм): 300250, 380350, 440550, 500500, 460610, 600500, 840840, 8401200, 1500*1000. For special dimension, customized laminates is available.

Material Thickness

F4BM-2 PCB material thickness(мм): 0.25, 0.5, 0.8, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0.

PTFE PCB and Teflon Properties

Teflon Properties

Teflon is a polymer obtained by polymerization of tetrafluoroethylene monomer. Its molecular structure can be regarded as the replacement of hydrogen atoms in polyethylene by fluorine atoms. Due to the existence of the strong C-F bond, Teflon has many properties that polymer materials lack, such as particularly low temperature resistance, particularly corrosion resistance, particularly difficult to be wetted, high lubrication, non-adhesion and so on. It is an important field in the fluorine chemical industry with rapid development, high technical content and good prospects. It is widely used in petroleum, химический, electronic appliances, медицинский, machinery and other fields.

F4BM-2 Teflon PCB

The main components of F4BM-2 are Teflon and glass fiber, which are made by Chinese PCB material manufacturers, so F4BM-2 has a very good cost performance.

Applications in China

F4BM-2 has been mass-produced and applied in China, such as 3G antenna PCB, 4G antenna PCB and so on. Specifically, F4BM-2 Teflon PCB has been adopted in these advanced communications technologies.

Предыдущий:

Следующий:

Оставить ответ

Оставить сообщение