โลโก้ UGPCB
Main Chipset
- Digital image acquisition and processing system chip
- A piece of DSP TMS320C13B chip
- NVRAM 2M bytes
- Two FPGA Lattice LFXP6C chips
- DSP chip 2MB FLASH, 8MB SDRAM
Technical Parameters
- 32 I/O inputs and 64 I/O outputs
- 2-way optical isolation RS232
- 1 RS422 interface and 1 RS485 interface
- 48-way 16-bit synchronous 200KSPS A/D conversion
- One photoelectric isolation CAN interface and one GPS timing
- Built-in real-time clock, power monitoring, and watchdog, ฯลฯ.
- Support -40～85℃ industrial wide temperature application
Introduction to PCBA of Digital Image Acquisition and Processing System
Overview
The digital image acquisition and processing system PCBA can realize high-speed image acquisition and storage of the camera, compress and serially communicate with the PC to realize the transmission of image data, realize image processing and display on the PC, ฯลฯ.
PCBA Design Mode
The PCBA design mode of the digital image acquisition and processing system adopts the hardware acquisition-software processing mode. After the image is sampled and quantized, it is converted into a digital image and input and stored in the frame memory. The image is analyzed by a computer to achieve the desired result.
Application Fields
Digital image acquisition and processing system PCBA can be used in various fields such as video conferencing, security monitoring, traffic charges, industrial inspection, image acquisition, and other image acquisition, processing, and analysis fields.
PCB Assembly Services
UGPCB provides Digital image acquisition and processing system PCB assembly services. This is a PCBA one-stop assembly factory with senior industry experience. Welcome to know us.
